What else do I need to connect if I choose delivery with a forklift or crane? (in 6 steps)

When you have a hot tub with a faucet whether caged monkey is delivered, this is done via an external party. This means that you have to connect a number of components yourself. Don't worry, with our clear instructions, that's easy to do.

These are small parts, such as the side table and banister (if ordered), but also to wood stove, biofuel stove and it filter system.

1. Position your hot tub

Place the hot tub in the desired location in your garden. Make sure you have a firm, flat surface and choose a place where you sit comfortably, preferably with a nice view.

2. Remove protective materials

During transport, your hot tub is protected with plastic and cardboard. Please remove it carefully before you start installing.

3. Connect the wood stove or biofuel stove

🔥 Connect the wood stove

Follow the instructions for the model you chose:

• Instructions for connecting the Welstove Medium
• Instructions for connecting the Welstove Large
• Instructions for connecting the Welstove Pro

⛽️ Ventilate the biofuel stove after connection

1. Check that there is sufficient fuel in the tank.
2. Rotate the wing nut at the bottom of the fuel pump 2 to 3 turns open.
3. Insert the stove plug into the socket of the filter box.
4. Press the power button to turn on the device. The pump will draw in fuel automatically.
5. Does an error appear? Turn the appliance off and on again until the burner stays lit.
6. Close the wing nut tightly again so that no more fuel leaks.

💡 Hint: When the fuel tank is empty, repeat this process after refilling.

4. Set up the filter system

A good filter system ensures clear and clean water.
Follow the instructions for connecting your filter pump and check that all swivels are tightened firmly.

5. Add the finishing touches

• Place it stairwell next to the hot tub.
• Confirm the side table (if ordered) with the supplied screws.
• Lay the cover on the hot tub as soon as everything is ready.

6. Get your hot tub ready to use

1. Fill the hot tub with water.
2. Add disinfectant as desired, such as AquaClean whether chlorine.
3. Set it filter system connect and connect other electrical systems.

Then you can heat the water and fully enjoy your hot tub!

Want to know more?

Do you have questions about the installation? Get in touch with our service department or watch the helpful explanation videos on our YouTube channel.